As national environmental protection standards continue to rise, individual heating boilers fueled by coal or oil are being phased out, replaced by systems that utilize clean energy sources such as electricity or natural gas. A common feature of these modern systems is the use of water as the medium for heat distribution.
In residential independent heating systems, the medium used is typically tap water. Tap water contains trace minerals—such as calcium, magnesium, and potassium ions, along with various sulfates—which, when heated, largely precipitate to form scale. Over time, this scale adheres to or encases the heating elements (tubes or rods) and coats the interior surfaces of the boiler’s water tank. Long-term use can significantly impair the heating performance of electric boilers and complicate future maintenance. Since many residential electric boilers employ metal heating elements, several distinct drawbacks emerge over time:
1. Scale accumulation hinders water circulation and heating efficiency
Because the metal heating elements used in these boilers cannot soften the water, scale continuously forms and settles. This accumulation reduces the effective volume of the water tank, thereby decreasing the total water capacity. Furthermore, scale deposits can adhere to the interior of the circulation piping, narrowing the pipe diameter and restricting water flow—potentially even causing localized blockages that compromise the overall heating performance.
2. Reduced heating efficiency and increased energy consumption
When metal heating elements become coated in a thick layer of scale, their ability to transfer heat to the water is severely diminished. Scale is a very poor thermal conductor—its thermal conductivity is only one-tenth to one-hundredth (or even less) that of metals like copper or iron. A reduction in heating efficiency leads to longer heating times for heating rods or tubes—meaning that, for a given power output, it takes more time to heat the water than it would under normal conditions. This increase in energy consumption not only compromises heating performance but can also shorten the service life of metal heating elements. For instance, a 1.5 mm layer of limescale causes an electric water heater to consume 6% more electricity; a 5 mm layer increases energy consumption by 15%, and an 8 mm layer drives that figure up to 34%. Consequently, both the thermal efficiency and the overall effectiveness of the electric heating system decline.
3. Compromised Operational Safety and Reduced Service Life
Under normal operating conditions, metal heating rods or tubes quickly transfer heat to the water in the tank. However, when these elements become covered or even encased in limescale, their ability to dissipate heat is severely impaired. The scale absorbs the heat, preventing it from reaching the water efficiently; this causes the internal temperature of the heating element to spike. Such extreme heat reduces the structural integrity of the metal, potentially leading to cracks on the surface of the heating element. This not only risks electrical leakage—which poses a direct safety hazard—but also shortens the component's lifespan.
4. High Maintenance Costs
Limescale that adheres to the heating surfaces—especially inside tubes—is notoriously difficult to remove. Frequent cleaning is required, which drives up maintenance costs and consumes significant human, material, and financial resources. Furthermore, the repeated use of mechanical or chemical descaling methods can damage the heating surfaces, drastically shortening the service life of the heating unit. The adoption of single-ended carbon fiber infrared heating tubes in electric heating systems can help mitigate these issues.
1. The infrared radiation emitted by single-ended carbon fiber infrared heating tubes can soften the tap water within the heating tank, making it less likely for limescale to form. Consequently, this prevents the formation of limescale deposits around the heating element—a common issue with metal heating tubes—and avoids the accumulation of scale on the inner surfaces of the heating unit’s water tank and piping. This improves both hot water circulation efficiency and heating quality.
2. Consistent, stable thermal efficiency for reduced energy consumption
When used over the long term, single-ended carbon fiber infrared electric heating tubes help soften the water, making it less likely for limescale to form. As a result, the surface of the heating tube remains free from scale buildup, ensuring that heat dissipation and heating efficiency are not compromised, which in turn prevents any increase in energy consumption.
3. Extended service life for heating equipment
Because these single-ended carbon fiber infrared heating tubes minimize limescale formation, scale does not accumulate on the heating unit’s water tank or within the water circulation pipes. This eliminates the need for frequent mechanical or chemical descaling, protecting the heated surfaces from damage and extending the service life of the heating unit—while also reducing maintenance costs.
4. Corrosion, acid, and alkali resistance
The quartz glass tube—which serves as the insulating outer shell—is a material with exceptional physical and chemical stability. It is virtually inert to all acids, with the exception of hydrofluoric acid. Its acid resistance is 30 times that of ceramics and 150 times that of stainless steel. With a thermal expansion coefficient of only 5.6 × 10⁻⁷ and excellent insulating properties—10,000 times greater than that of ordinary glass—it maintains superior electrical insulation even at high temperatures.
Following two years of practical application and promotion (2018–2019) across nearly a thousand electric heating units, our products have earned widespread user approval. We have further refined and optimized the design based on feedback from our clients. The technology is patented (Utility Model Patent No. ZL2019 21238889.1; Design Patent No. ZL201930552105.1). We welcome inquiries from potential business partners.
Navigation
Send Us A Message